Yellow Buggy – A tiny and robust RC LEGO car

Posted by on Jun 21, 2016 in Featured, LEGO | 0 comments

Yellow Buggy – A tiny and robust RC LEGO car

This is a very small, robust, reliable and easy to maintain buggy. It is ideal for letting your kids play with all day. The design goal was to make a robust car as small and simple as possible. This means most of all no suspension system since that would require the use of CV joints. They are known to break and while they work nicely in LEGO super cars that you carefully push around the floor, it does not work with kids trying to race and crash their RC cars. CV joints will break. Of course it is possible to create a LEGO RC car with suspension and even four wheel drive/steering, but then you end up with LEGO’s own RC Crawler. The goal was to keep it small, simple and robust.

One of the problems I encountered when letting kids play with the RC cars all day is that the axles in the differential tend to slip and move out. I hence build a differential assembly in which the axles are completely locked in and cannot move. The worst thing that could still happen is that a wheel comes off which is easy to fix.

The car uses only one L-Motor and is pretty fast for that. The turning radius is very tight and the car is just fun to drive. The differential makes it perfect to drive around tight corners. The heavy battery pack is right on top of the back axle, giving it the best friction. Well, it does not accelerate like an F1, but it might still make a small difference.

The Building Instructions do not contain the L-Motor and the servo motor since they are both not yet part of Digital Designer. The Yellow Buggy is also available as a 3D file (LXF) for LEGO Digital Designer. Head over to Rebrickable for the Yellow Buggy MOC and its part list.

I also ran Bluerender to make a nice 3D spin of the car.

 

Leave a Reply

Your email address will not be published. Required fields are marked *