It was time to improve the performance of this Raspberry C64 Pi computer by adding the official regulated fan to the case. I also added a USB audio adapter to improve the sound quality. With these two inexpensive upgrades, the Raspberry Pi performs much better and the audio quality is much improved.
Recording a clear voice with no background noise is key for any video, audiobook or podcast. If you are limited in space and budget then you might consider building your own little sound proof voice recording box. I build this little gem from 6mm MDF and some acoustic foam taped to the box with double sided tape.
For the box you can create the drawing necessary for the laser cutter using online tools, such as Box Designer. It exports a PDF file which all the six faces clearly separated. If you are planning to make efficient use of your wood then you may prefer MakerCase. This service aligns the six sides so that they can be cut most efficiently from a piece of MDF. Here is the box drawing for laser cutter used for this design.
We attached rubber feed to the box and placed the microphone on an old mouse pad to isolate the microphone from any vibrations of the table, such as when a laptop is placed on it. Handles on the side allow for an easy transportation.
Here is a recording without the box. The microphone was placed just directly on the table:
This recording was made with the speaker sitting in front of the box speaking into the microphone.
The last example is with the speaker leaning into the box.
You will notice how all ambient noice is gone and how intimate the voice of the speaker sounds.