Comparison of color measurement accuracy of ColorMunki Design and FRU WR-10QC Colorimeter

Review of the measurement accuracy of the ColorMunki Design and the FRU WR-10.

I am working on a colour project and had purchased the WR10 colorimeter to complement my long serving work horse, the X-Rite Color Munki Design. My ColorMunki is already several years old and I was concerned that its accuracy might have declined. When I measured several hundreds of samples, I noticed that both colorimeters gave me considerably different LAB values.

To determine which device was closer to the truth I measured the 48 defined colours of Datacolor’s SpyderCHECKR 48. I calculated the absolute error both devices made. The results of a paired-sample t-test showed that the ColorMunki is producing significantly less measurement errors on L (t(47)=-9.229, p<0.001), L (t(47)=-4.590, p<0.001) and L (t(47)=-4.871, p<0.001). However, both devices measure colours that are significantly different from the target colour of the SpyderCheckr card on all three measurements. Figure 1 shows the means and standard deviation for all measurement errors.

Figure 1: Mean and Standard Deviation of all measurements for both devices.

There does seem to be some structure in the errors that WR-10 is producing. Have a look at the heat map (Figure 2). The data for my little experiment is available at the Open Science Framework (DOI: 10.17605/OSF.IO/UWEFD).

Figure 2: Heat Map of the absolute errors

Although both devices show some significant deviation from the original, it is not far off from what can be expected of devices in this price range. The ColorMunki Design produces significantly better results than the FRU’s WR-10QC.

Revisiting 8230 Coastal Police Buggy – Review

A review of the new closed beta software. It is an excellent LEGO digital design software with a huge potential.

Back in 1996 I created 3D animated building instructions for the set 8230 Coasatal Policy Buggy. It was part of an internship at a 3D Company and it took me months to model every brick and to animate the whole model. Below is a rendering that took half a day to render. Twenty years later it is time to build this model again. Not with LEGO Digital Designer (LDD), but with, the latest addition to virtual LEGO editors. is currently a closed beta and the makers of Bricklink sign responsible for its development. Continue reading “Revisiting 8230 Coastal Police Buggy – Review”